THIS PRODUCT HAS BEEN RETIRED AND IS NO LONGER AVAILABLE
DSO-500K
The DSO-500K is a 2-Channel 500kS/s oscilloscope with Wi-Fi and USB connectivity.
The DSO-500K uses our highly rated Scoppy Android app to display the waveform data and control the oscilloscope.
Features and Specifications
Up to 500kS/s sample rate (250kS/s with both channels enabled)
Maximum analog bandwidth: 150kHz
Record length: 2048 samples per channel in RUN mode, 100kS total for single shot captures
Input Impedance: 1MΩ / 22pF
Maximum Input voltage range: +/- 6V (1X probes)
Coupling: AC/DC
Connectivity: USB, Wi-Fi
Display Modes: YT, FFT, FFT+YT, X-Y, X-Y+YT
Trigger Types: Rising edge/falling edge
Trigger Modes: Auto/Normal (Run Mode + Single captures)
Cursors: YT and FFT horizontal and vertical cursors
On-screen measurements: Vmin, Vmax, Vpp, Frequency, Period, Duty
Snapshot measurements (screen or sample record): Mean, DC RMS, AC RMS
Export data format: CSV
Signals can be input via 0.1” header pins or BNC connectors
Signal generator - square wave up to 1.25MHz, sine wave - 1kHz
AC and DC coupling of the input signals
Indicator LEDs: Status, Wi-Fi and Trigger
FFT Window functions: Hann, Hamming, Blackman, Rectangle
FFT Vertical units: dBm, dBmV, V
Logic Analyzer: 25MS/s (requires soldering extra headers to the board - not supplied). No protocol decoding as yet.
Requires an Android device with the Scoppy app installed (the premium features of the app will be automatically unlocked. Upgrading to the premium version of the app is not required).
See the Scoppy project on GitHub for the features of the Scoppy oscilloscope firmware and Android app
More Information
Buy
Price^
FHDM DSO-500K
$29.99 plus shipping
Shipping^^
Shipping costs are available at Tindie and Elecrow. See below.
^Prices are in $USD
THIS PRODUCT HAS BEEN RETIRED AND IS NO LONGER AVAILABLE TO PURCHASE
What You'll Need
An Android device that's running Android version 6.0 (Marshmallow) or higher. The device must also support USB OTG (On-The-Go) - most modern phones/tablets do. If you are able to install the Scoppy app from the Play Store then (Google thinks) it does support USB OTG.
A compatible OTG cable/adapter (not supplied). Even if you are planning to use Wi-Fi, we recommend having a compatible OTG (On-The-Go) cable so you can access the firmware settings in the event you can't connect via Wi-Fi (eg. if your Wi-Fi password changes or the Wi-Fi settings in the firmware were entered incorrectly). The OTG adapter plugs into the USB port of your Android device.
Please Note
Android device and scope probes are NOT included
Requires an Android device with the Scoppy app installed
For DSO-500Ks purchased at Tindie, the premium features of the Scoppy app will be automatically unlocked once you connect the DSO-500K to your Android device. Upgrading to the premium version of the app is not required.
For DSO-500Ks purchased at Elecrow, you will receive a free upgrade to the premium version of the Scoppy app. Your unique upgrade code will be included with the oscilloscope.
Gallery
The DSO-500K
DSO-500K and the Scoppy Android app
FAQ
Do I need oscilloscope probes to use the DSO-500K?
No. You can use dupont wires if you don't have probes.
Is the DSO-500K suitable for use in the classroom as part of a STEM curriculum?
Yes, the DSO-500K has been specifically designed to work with low voltage circuits typically used in STEM education. The DSO-500K has many of the features of a benchtop oscilloscope but at a fraction of the price (eg. FFT, X-Y mode, cursors and math channels). The Wi-Fi capabilities of the DSO-500K allow the oscilloscope to be controlled from the student's device without a physical connection. For pricing or classroom sets, please contact us at store@fhdm.xyz
For a more affordable alternative to the DSO-500K, see the FSCOPE-500K product page.
